When facing the "The file is too large for the destination file system" issue in Windows 10/8/7 or the other previous version, you'd possibly not find out that why you would not be able to copy the file to your external disk drive, USB drive or another storage devices when there's sufficient free space.The File is Too Large for FAT32 File System The File is Too Large for the Destination File System. Long ago, Windows used a FAT file system on its hard drive. Afterward, an updated FAT system has long been used on Windows 95 OSR2, Windows 98, and Windows Me. The file system storing is called FAT32 which provides a default cluster size as smallAs per the above analysis when the maximum size of the destination drive file system is limited, You will experience the "The file is too large for the destination file system" issue on your Windows computer.The 'file too large for destination file system' error in Windows is becoming rarer thanks to larger drives that use the NTFS file system. Any drive formatted with FAT32 is only capable of handling 4GB files. Anything larger than that, even if made up of smaller individual files, will not work. FAT32 simply cannot handle it.And the FAT32 File Size Limit is 4GB. This is the reason for the error 'the file is too large for the destination file system' during file transfer to pen drive or external SD card. FAT32 does not give permission to users to copy big files, the size of each individual file may not exceed 4GB. We can solve this problem easily within a minute.
Ever got a message like that? When copying or transfer a file, the system says "file too large for USB" or "the file is too large for destination file system". But the available space is more than enough. Why this can't be transferred? Well, the problem is not from the USB drive, instead, it's caused by the type of system on the drive.Method 2: Format your Device using the NTFS file system. 1. Right-click on your USB drive and select Format.. 2. Now change the file system to NTFS (Default).. 3. Next, in the Allocation unit size dropdown select Default.. 4.The file FileName.ext is too large for the destination file system. FileName.ext Item type: FileType Size: xx KB [Cancel] This could be a file of any size. The size of the file is fully supported by the destination file system. For example, the file you are copying is smaller than 30 Kbytes and the destination file system is NTFS.4 Solutions to "The File Is Too Large for the Destination USB" When you try to transfer large files from your computer to USB, sometimes, you'll face the issue "The File Is Too Large for the Destination file system". In this article, several pragmatic methods will be given to help fix "The file is too large for the destination USB".
In comparison, for NTFS, the maximum size of a single file is increased to 16TB. Based on mentioned above, "The file is too large for the destination file system" issue results from the limit of maximum size of the destination drive file system. Hence, you can check your drive file system. Most of time, it may be either FAT or FAT32.Hi guys this is channel f&D in this video im going to show you guys how to fix "the file is too large for the destination file system" without formatting the...How to Fix "file is too large for the destination file system" by Converting: The alternative to formatting the disk is to convert it to another format. Basically, the process makes it take all the files that are on the USB memory or external hard drive and change the format keeping the files.Trên đây là những hướng dẫn đơn giản có thể giúp người dùng khắc phục được lỗi the file is too large for the destination khi copy, lưu trữ file dữ liệu có dung lượng quá 4GB. Hy vọng với thủ thuật nhỏ này đã giúp các bạn khắc phục lỗi thành công.The primary reason behind the error 'File Too Large for Destination File System' is the file you want to transfer have size more than 4GB. You may be wondering so what's the issue your Flash Drive have enough space at least more than 4GB, so why the error.Larutan Yang Bersifat Asam Cek Resi Indah Logistik D Heaven Spa Terapis Sumber Sirah Gondanglegi Kelainan Otot Yang Disebabkan Adanya Infeksi Bakteri Clostridium Tetani Ikan Baronang Bakar Lari Jarak Dekat Menggunakan Start Goosebumps Sub Indo Avast Service High Disk Usage Border Portal Binus Struktur Dan Kaidah Cerpen
Updated on November 6th, 2020
This post introduces causes and solutions to error “File is too large for the destination file system”. This file size too large error may occur when you copy a very large file to a USB disk even though the disk has enough free space. If you are confused by this error, you can follow methods in this guide to fix it.
As Windows user you will definitely encounter an error message while copying any single large file (exceed 4GB) to removable storage device like SD card, pen drive, USB flash drive, external hard drive, etc. The error appears on “File Too Large” message box saying “The file <file name> is too large for the destination file system.” with detailed information about the file being transferred.
Here is one of the questions asked on forum:
“Hey All! I was trying to move a few movies and videos from my laptop to my WD Passport (500GB). The biggest file is 4.7GB and the total size of them is about 20GB and the external drive still has 180GB free space. I thought there won’t be problem storing these files. But it still says file too large for USB. I don’t understand why it is too big. Don’t know what to do and I’m kind of need to get this done. Please!”
If you run into such problem, you should check the file system for the target disk which must have been formatted to FAT32 file system. This file system type has a built-in limitation on per file size it can access. Although the total file size you can copy to a FAT32 partition can be 2TB at most, per file size shouldn’t be larger than 4GB.
FAT32 was introduced by Microsoft during the days of Windows 95 when such large files were unthinkable or designers believed it would be replaced by more advanced file system. How to eliminate the limitation and copy 4GB files? You need to convert file system from FAT32 to NTFS or exFAT. Both NTFS and exFAT are able to copy a file larger than 4GB.
Both NTFS and exFAT are robust file system, but which one is better depends on the storage device you use. NTFS (New Technology File System) is mainly used on hard drive and external hard drive. It is compatible with all Windows versions from Windows NT to Windows 10, and it provides features not supported by FAT32 such as file security, encryption, compress, etc. NTFS is also read-supported by Mac OX. exFAT has good compatibility on many flash drives or memory cards which might be used under Android phones, tablets, digital cameras. Besides, it is read and write supported by recent versions of Mac OS. If you want to use your external disk on both Windows and Mac platform, you can format it into exFAT.
This is an easy but limited method to circumvent this 4GB file limitation. You can use compression software installed on your computer to compress the file into a smaller one. If file becomes smaller than 4 GB after compression, then problem solved. Compressed files occupy less disk space and can be moved more quickly.
Formatting deletes all data from the partition, if it contains important data, you should back up files before trying following steps.
If USB drive loses data, you can use free data recovery software to do USB drive recovery and get back deleted or lost files easily.Attach the USB disk to computer and wait for system to recognize it and assign a drive Double Computer icon to open it and location drive letter for the USB disk that you want to change file system format. Before formatting, you need to open this drive and check whether there are important files. If this disk can’t be opened and reports errors such as “Please insert a disk into removable disk”, you should use recovery software to retrieve data. Right click the USB drive and select “Format” from the menu. Select NTFS or exFAT from the drop-down list of the File system section. The default file system might be FAT32, thus you should set it manually. Apart from that, the “Quick Format” option should be select to ensure the formatting can be completed in shortest time. If you can’t find needed file system type from the drop-down list, you can use PartitionGuru to do the formatting job. Click Start button and you’ll get a message box telling formatting will erase all data on this disk. If you have backed up important data, click OK button and formatting will be done in seconds.
This method can convert FAT to NTFS without deleting existing file, but it is still recommended to create a backup of your files before starting the conversion.Insert USB drive to computer and open Windows Explorer to see its drive letter which is G in this example. Click Start button and type in cmd in the searching box and hit Enter. In Command Prompt type in chkdsk G: /f : and hit enter. Here G is the drive letter of the USB drive you want to convert. It check error for the drive. Enter convert G: /FS:NTFS and press Enter. Make sure you are using correct drive letter, if not replace “G” for the letter of the drive to be converted. The process may take a while, just let it run and finish. When conversion completes, check whether file system is correctly converted and file in order.